en:docuteam:packer_500_config
Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
| Beide Seiten der vorigen RevisionVorhergehende ÜberarbeitungNächste Überarbeitung | Vorhergehende Überarbeitung | ||
| en:docuteam:packer_500_config [2018/11/01 09:32] – penelope | en:docuteam:packer_500_config [2023/02/06 15:24] (aktuell) – gelöscht Administrator | ||
|---|---|---|---|
| Zeile 1: | Zeile 1: | ||
| - | FIXME **Diese Seite wurde noch nicht vollständig übersetzt. Bitte helfen Sie bei der Übersetzung.**\\ //(diesen Absatz entfernen, wenn die Übersetzung abgeschlossen wurde)// | ||
| - | ====== docuteam packer starten und konfigurieren ====== | ||
| - | |||
| - | docuteam packer is delivered in specific packages for the various operating systems, but can also be launched using the command line: | ||
| - | |||
| - | < | ||
| - | |||
| - | Following optional parameters are supported: | ||
| - | |||
| - | * configDir < | ||
| - | * help (optional): Anzeige der Hilfe | ||
| - | * open < | ||
| - | |||
| - | ===== configuration files ===== | ||
| - | |||
| - | docuteam packer can also be configurated manually using the following configuration files: | ||
| - | * config/ | ||
| - | * config/ | ||
| - | * config/ | ||
| - | * config/ | ||
| - | |||
| - | In the following examples, \\ | ||
| - | the file [[docuteam: | ||
| - | the file [[docuteam: | ||
| - | the file [[docuteam: | ||
| - | the file [[docuteam: | ||
| - | |||
| - | |||
| - | ===== config/ | ||
| - | |||
| - | ==== Example ==== | ||
| - | |||
| - | < | ||
| - | |||
| - | ################################ | ||
| - | # docuteam packer properties | ||
| - | ################################ | ||
| - | |||
| - | # Display language (if undefined or empty, use the OS language): | ||
| - | docuteamPacker.displayLanguage = de | ||
| - | |||
| - | # The default data directory, used for " | ||
| - | # NOTE: Environment variables can be referenced by embedding them between " | ||
| - | docuteamPacker.dataDir.Win = C:/ | ||
| - | # docuteamPacker.dataDir.OSX = | ||
| - | # docuteamPacker.dataDir.Linux = | ||
| - | |||
| - | # The default SIP directory, used for "Save as", " | ||
| - | # NOTE: Environment variables can be referenced by embedding them between " | ||
| - | docuteamPacker.SIPDir.Win = C:/ | ||
| - | # docuteamPacker.SIPDir.OSX = | ||
| - | # docuteamPacker.SIPDir.Linux = | ||
| - | |||
| - | # The backup directory, used when saving SIPs (if undefined or empty, use SIPDir): | ||
| - | # NOTE: Environment variables can be referenced by embedding them between " | ||
| - | # docuteamPacker.backupDir.Win = | ||
| - | # docuteamPacker.backupDir.OSX = | ||
| - | # docuteamPacker.backupDir.Linux = | ||
| - | |||
| - | # The directory the templates are stored in and retrieved from (if undefined or empty, use SIPDir): | ||
| - | # NOTE: Environment variables can be referenced by embedding them between " | ||
| - | # docuteamPacker.templateDir.Win = | ||
| - | # docuteamPacker.templateDir.OSX = | ||
| - | # docuteamPacker.templateDir.Linux = | ||
| - | |||
| - | # The directory the export templates (xsl) are stored in and retrieved from (if undefined or empty, use " | ||
| - | # NOTE: Environment variables can be referenced by embedding them between " | ||
| - | # docuteamPacker.exportsDir.Win = | ||
| - | # docuteamPacker.exportsDir.OSX = | ||
| - | # docuteamPacker.exportsDir.Linux = | ||
| - | |||
| - | # The directory the report templates (xsl) are stored in and retrieved from (if undefined or empty, use " | ||
| - | # NOTE: Environment variables can be referenced by embedding them between " | ||
| - | # docuteamPacker.reportsDir.Win = | ||
| - | # docuteamPacker.reportsDir.OSX = | ||
| - | # docuteamPacker.reportsDir.Linux = | ||
| - | |||
| - | # The temp-folder for temporary files can be set here (if undefined or empty, use the folder " | ||
| - | # NOTE: Environment variables can be referenced by embedding them between " | ||
| - | # docuteamPacker.tempDir.Win = | ||
| - | # docuteamPacker.tempDir.OSX = | ||
| - | # docuteamPacker.tempDir.Linux = | ||
| - | |||
| - | # For the submission process: The class name of the AIPCreator (if undefined or empty, don't use): | ||
| - | docuteamPacker.AIPCreator.className = ch.docuteam.darc.ingest.AIPCreatorBasic | ||
| - | |||
| - | # For the submission process: The directory where to copy the submitted SIPs to (= ingest drop folder) (if undefined or empty, don't use): | ||
| - | # NOTE: Environment variables can be referenced by embedding them between " | ||
| - | AIPCreator.ingestSubmitDir.Win = C:/ | ||
| - | # AIPCreator.ingestSubmitDir.OSX = | ||
| - | # AIPCreator.ingestSubmitDir.Linux = | ||
| - | |||
| - | # When true (case doesn' | ||
| - | # docuteamPacker.newSIPDeleteSourcesByDefault = false | ||
| - | |||
| - | # When true (case doesn' | ||
| - | # docuteamPacker.newSIPDefaultsToZipped = false | ||
| - | |||
| - | # When true (case doesn' | ||
| - | # docuteamPacker.migrateFileKeepOriginal = false | ||
| - | |||
| - | # When true (case doesn' | ||
| - | docuteamPacker.versioning = false | ||
| - | |||
| - | # When docuteamPacker.versioning = true, set here the max. number of backups. Exeeding backups will be deleted (if undefined or empty, use default = 10) | ||
| - | # docuteamPacker.versioning.keepBackupsCount = 20 | ||
| - | |||
| - | # When true (case doesn' | ||
| - | # docuteamPacker.openFullScreen = true | ||
| - | |||
| - | # When openFullScreen is not true, these values denote the docuteam packer screen size on startup (if undefined, take 1000 x 700): | ||
| - | # docuteamPacker.screenSize.x = 1200 | ||
| - | # docuteamPacker.screenSize.y = 1000 | ||
| - | |||
| - | # When openFullScreen is not true, these values denote the docuteam packer screen position on startup (if undefined, center on screen): | ||
| - | # docuteamPacker.screenPos.x = 100 | ||
| - | # docuteamPacker.screenPos.y = 100 | ||
| - | |||
| - | # When true (case doesn' | ||
| - | # docuteamPacker.useSystemLookAndFeel = false | ||
| - | |||
| - | # Set the default digest algorithm to calculate file checksums (valid values: CRC-32, MD5, SHA-1, SHA-256, SHA-512) | ||
| - | # docuteamPacker.defaultChecksumAlgorithm = MD5 | ||
| - | |||
| - | # When true, retrieve the current SAs from the server (from URL below) on startup; otherwise don't (undefined = false): | ||
| - | # docuteamPacker.SA.getSAsFromServerOnStartup = true | ||
| - | |||
| - | # The URL of the SA editor application (webjaxe): | ||
| - | # docuteamPacker.SA.BASE.URL = | ||
| - | |||
| - | # The complete file path to the OOO application (" | ||
| - | # if undefined or empty AND the internal OOO application doesn' | ||
| - | # docuteamPacker.OOConverter.path.Win = C:\Program Files\OpenOffice.org 3 | ||
| - | # docuteamPacker.OOConverter.path.OSX = / | ||
| - | # docuteamPacker.OOConverter.path.Linux = | ||
| - | |||
| - | # The number of initialization retries for the OOConverter (if empty, undefined, negative, or 0, use the default number, which is 10): | ||
| - | # docuteamPacker.OOConverter.initializationRetries = 30 | ||
| - | |||
| - | # The number of files to cache for the file preview (if undefined or empty, use the default cache size, which is 100): | ||
| - | # docuteamPacker.filePreviewer.cacheSizeLimit = 10 | ||
| - | |||
| - | # When true, the SystemOutView opens when output occurs; otherwise not (undefined = true): | ||
| - | # docuteamPacker.openSystemOutViewOnOutput = false | ||
| - | |||
| - | # When true, expand all nodes in tree of SIPView (if undefined or empty, use false as default) | ||
| - | # docuteamPacker.SIPView.TreeExpandAll = true | ||
| - | |||
| - | # When a value between 1 and 3 is given, the appropriate tab in SIPView is automatically set (if undefined or empty, 1 is assumed) | ||
| - | # docuteamPacker.SIPView.DefaultTab = 1 | ||
| - | |||
| - | # For developers (undefined = false): | ||
| - | # docuteamPacker.isDevMode = true | ||
| - | |||
| - | </ | ||
| - | ==== Explanations ==== | ||
| - | |||
| - | The values " | ||
| - | |||
| - | ^ Field | ||
| - | ^ displayLanguage | en |The language displayed in the user interface. So far there are three translations available (de = german, en = english, fr = french). If another language is set, packer will be displayed in German. | The default language of the computer. If it's neither “de”, “en” or “fr”, packer will be displayed in German. | | ||
| - | ^ dataDir | C:/ | ||
| - | ^ SIPDir | C:/ | ||
| - | ^ backupDir | C:/ | ||
| - | ^ templateDir | C:/ | ||
| - | ^ exportsDir | C:/ | ||
| - | ^ reportsDir | C:/ | ||
| - | ^ tempDir | ||
| - | ^ ingestSubmitDir | C:/ | ||
| - | ^ newSIPDeleteSourceByDefault| true | ||
| - | ^ AIPCreator.className | ||
| - | ^ newSIPDefaultsToZipped | ||
| - | ^ migrateFileKeepOrginial | ||
| - | ^ versioning | | ||
| - | ^ versioning.keepBackupsCount| 20 |Maximum amount of created backups. If this amount is exceeded, the oldest backups are deleted. | ||
| - | ^ openFullScreen | | ||
| - | ^ screenSize.x\\ screenSize.y | 1200\\ 1000 |The window size of the SIP-View in pixels. These values are ignored, when < | ||
| - | ^ screenPos.x\\ screenPos.y | 500\\ 500 |The position of the window when opening the SIP-View. These values are ignored, when < | ||
| - | ^ useSystemLookAndFeel | false |If true, the appearance of packer will be adapted to the operating system of the computer. If false, a generic appearance | ||
| - | ^ defaultChecksumAlgorithm | ||
| - | ^ droid.signatureFile\\ droid.containerFile\\ droid.extensionUsage | ||
| - | ^ SA.getSAsFromServerOnStartup | true | ||
| - | ^ SA.BASE.URL | < | ||
| - | ^ OOConverter.path | C:/ | ||
| - | ^ OOConverter.initializationRetries | 30 |The number of attempts during the initialisation of LibreOffice. Necessary for the preview of certain formats. | 10 | | ||
| - | ^ filePreviewer.cacheSizeLimit | 20 |Cache size for the preview of files. The larger the cache size, the more previews packer saves to memory. | 100 | | ||
| - | ^ openSystemOutViewOnOutput | true |If true, in the event of an error, the error window is automatically opened. If false, the error window doesn' | ||
| - | ^ SIPView.TreeExpandAll | ||
| - | ^ SIPView.DefaultTab | ||
| - | ^ actionsNotVisible | ||
| - | ^ isDevMode | false |should only be = true during the development of packer | Like false | | ||
| - | |||
| - | ===== config/ | ||
| - | |||
| - | ==== Example ==== | ||
| - | |||
| - | < | ||
| - | <?xml version=" | ||
| - | < | ||
| - | xmlns: | ||
| - | xmlns: | ||
| - | xsi: | ||
| - | |||
| - | < | ||
| - | < | ||
| - | <!-- 1 --> | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | <!-- 2 --> | ||
| - | < | ||
| - | < | ||
| - | <!-- 3 --> | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | <!-- 4 --> | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | <!-- 5 --> | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | <!-- 6 --> | ||
| - | < | ||
| - | <!-- 7 --> | ||
| - | < | ||
| - | </ | ||
| - | |||
| - | < | ||
| - | <!-- NOTE: The 1st element in this list always has to be the " | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | </ | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | </ | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | </ | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | </ | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | </ | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | </ | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | </ | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | </ | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | </ | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | < | ||
| - | </ | ||
| - | </ | ||
| - | |||
| - | </ | ||
| - | </ | ||
| - | |||
| - | In the first section of the levels.xml file (< | ||
| - | In the second section of the levels.xml file (< | ||
| - | ==== metadata element ==== | ||
| - | |||
| - | A metadata element is defined by following five attributes: | ||
| - | |||
| - | ^ Name ^ Content(example) ^ Explanation | ||
| - | ^ accessorNameId | accessNr |Explicit name of the metadata field. The name must correspond to one of the [[#List of descriptive metadate according to the Encoded Archival Description (EAD)|elements in the list below]], through which the data in packer is accessed. In case of need a metadata field can receive an individual label through the i18n-configuration. | mandatory | | ||
| - | ^ defaultExpression | ' | ||
| - | ^ validatorClassName | ch.docuteam.darc.mdconfig.MetadataElementValidatorDate |A Java class, which validates the content of this meatadata element upon its allocation. If the entered value is not valid, an error message is displayed and the field reverts to the last value. | ||
| - | ^ postActionClassName | ch.docuteam.darc.mdconfig.MetadataElementSetterPostActionSysOut |A Java class, which executes any given action, **after** a value has been entered into this field. This action is **not** executed if the validation of the entered value fails. | optional | | ||
| - | ^ allowedValues | *; | ||
| - | |||
| - | An example: | ||
| - | |||
| - | < | ||
| - | < | ||
| - | defaultExpression='" | ||
| - | allowedValues=" | ||
| - | </ | ||
| - | With the element < | ||
| - | |||
| - | < | ||
| - | < | ||
| - | < | ||
| - | |||
| - | < | ||
| - | </ | ||
| - | ==== Levels of description ==== | ||
| - | |||
| - | A level of description is defined by the following 3 attributes: | ||
| - | |||
| - | ^ Name ^ Content (example) | ||
| - | ^ nameID | archive | ||
| - | ^ iconFileName | resources/ | ||
| - | ^ allowedSublevelNameRefs | ||
| - | |||
| - | An example: | ||
| - | |||
| - | < | ||
| - | < | ||
| - | allowedSublevelNameRefs=" | ||
| - | </ | ||
| - | |||
| - | The allocation of metadata elements to levels of description is defined by a list of elements < | ||
| - | |||
| - | ^ Name ^ Content (example) ^ Explanation^ Mandatory^ | ||
| - | ^ accessorNameRef | language |The accessorNameID of the metadata element; references an accessorNameID from the list < | ||
| - | ^ isMandatory | true |If true, this metadata element is mandatory. Mandatory elements are always displayed in the metadata list. If a mandatory element is empty, the dossier is marked with an exclamation point. | * | | ||
| - | ^ isRepeatable | false |If true, there can be multiple copies/ | ||
| - | ^ isAlwaysDisplayed | true |If true, this metadata element is always displayed in the metadata list. | | | ||
| - | ^ isReadOnly | false |If true, this metadata element **can' | ||
| - | ^ keepInTemplate | false |If true, this metadata element is preserved (and **not deleted**) when creating a template/an SIP model. | | | ||
| - | ^ displayRows | 5 |Displays the number of rows for this metadata element in the metadata list. | | | ||
| - | |||
| - | An example: | ||
| - | |||
| - | < | ||
| - | < | ||
| - | isRepeatable=" | ||
| - | isAlwaysDisplayed=" | ||
| - | isReadOnly=" | ||
| - | </ | ||
| - | |||
| - | |||
| - | ==== List of descriptive metadate according to the Encoded Archival Description (EAD) ==== | ||
| - | |||
| - | All descriptive metadata are stored in the '' | ||
| - | |||
| - | {{: | ||
| - | |||
| - | ^AccessorNameID^Xpath relative to a <c> or < | ||
| - | ^abstract | EAD: | ||
| - | ^accessionNumber | EAD: | ||
| - | ^accessNr | EAD: | ||
| - | ^accessPolicy | EAD: | ||
| - | ^accessRestriction | EAD: | ||
| - | ^accessRestrictionClassification | EAD: | ||
| - | ^accessRestrictionClosureYear | EAD: | ||
| - | ^accessRestrictionExplanation | EAD: | ||
| - | ^accessRestrictionIsMetadataPublic | EAD: | ||
| - | ^accessRestrictionIsPublic | EAD: | ||
| - | ^accessRestrictionPeriod | EAD: | ||
| - | ^accessRestrictionPeriodBaseYear | EAD: | ||
| - | ^accessRestrictionPrivacy | EAD: | ||
| - | ^accessRestrictionStatus | EAD: | ||
| - | ^accessRestrictionStatusExplanation | EAD: | ||
| - | ^accruals | EAD: | ||
| - | ^appraisalAndDestruction | EAD: | ||
| - | ^appraisalDateDisposed | EAD: | ||
| - | ^appraisalIsOnHold | EAD: | ||
| - | ^appraisalRetentionPeriod | EAD: | ||
| - | ^archivalHistory | EAD: | ||
| - | ^arrangement | EAD: | ||
| - | ^author | EAD: | ||
| - | ^bibliography | EAD: | ||
| - | ^biographicalHistory | EAD: | ||
| - | ^cartographicMaterial | EAD: | ||
| - | ^characteristics | EAD: | ||
| - | ^characteristicsNote | EAD: | ||
| - | ^codeLocation | EAD: | ||
| - | ^comment | EAD: | ||
| - | ^compartment | EAD: | ||
| - | ^conditionsOfReproductions | EAD: | ||
| - | ^creationPeriod | EAD: | ||
| - | ^creationPeriodNotes | EAD: | ||
| - | ^creator | EAD: | ||
| - | ^date | EAD: | ||
| - | ^dateOfBirth | EAD: | ||
| - | ^deathOfAuthor | EAD: | ||
| - | ^descriptionLevel | EAD: | ||
| - | ^descriptionLevelNotes | EAD: | ||
| - | ^descriptionRules | EAD: | ||
| - | ^digitization | EAD: | ||
| - | ^dimensions | EAD: | ||
| - | ^DOI | EAD: | ||
| - | ^DoiJournal | EAD: | ||
| - | ^editionStatement | EAD: | ||
| - | ^event | EAD: | ||
| - | ^extent | EAD: | ||
| - | ^extentNote | EAD: | ||
| - | ^extentUnit | EAD: | ||
| - | ^familyName | EAD: | ||
| - | ^findingAids | EAD: | ||
| - | ^firstname | EAD: | ||
| - | ^format | EAD: | ||
| - | ^from | EAD: | ||
| - | ^fromYear | EAD: | ||
| - | ^fullLocation | EAD: | ||
| - | ^function | EAD: | ||
| - | ^fundingSource | EAD: | ||
| - | ^geogName | EAD: | ||
| - | ^institute | EAD: | ||
| - | ^institution | EAD: | ||
| - | ^institutionCreator | EAD: | ||
| - | ^institutionInvolved | EAD: | ||
| - | ^involved | EAD: | ||
| - | ^ISBN | EAD: | ||
| - | ^ISSN | EAD: | ||
| - | ^journal | EAD: | ||
| - | ^keyword | EAD: | ||
| - | ^language | EAD: | ||
| - | ^languageNotes | EAD: | ||
| - | ^lastname | EAD: | ||
| - | ^location | EAD: | ||
| - | ^locationOfOriginals | EAD: | ||
| - | ^material | EAD: | ||
| - | ^method | EAD: | ||
| - | ^modeOfAcquisition | EAD: | ||
| - | ^nationality | EAD: | ||
| - | ^objectType | EAD: | ||
| - | ^occupation | EAD: | ||
| - | ^origination | EAD: | ||
| - | ^originationAgency | EAD: | ||
| - | ^originationDepartment | EAD: | ||
| - | ^otherLevelName | [@level = ' | ||
| - | ^PID | EAD: | ||
| - | ^placeOfPublication | EAD: | ||
| - | ^processInfoArchivist | EAD: | ||
| - | ^processInfoDate | EAD: | ||
| - | ^project | EAD: | ||
| - | ^projectAbbreviation | EAD: | ||
| - | ^projectName | EAD: | ||
| - | ^projectTitle | EAD: | ||
| - | ^publisher | EAD: | ||
| - | ^refCode | EAD: | ||
| - | ^refCodeAdmin | EAD: | ||
| - | ^refCodeIsVisible | EAD: | ||
| - | ^refCodeOld | EAD: | ||
| - | ^refCodeSeparator | EAD: | ||
| - | ^relatedMaterial | EAD: | ||
| - | ^relationPeriod | EAD: | ||
| - | ^reproductions | EAD: | ||
| - | ^responsible | EAD: | ||
| - | ^retentionPeriod | EAD: | ||
| - | ^retentionPeriodBaseYear | EAD: | ||
| - | ^retentionPolicy | EAD: | ||
| - | ^revisions | EAD: | ||
| - | ^scopeContent | EAD: | ||
| - | ^sex | EAD: | ||
| - | ^size | EAD: | ||
| - | ^sourceType | EAD: | ||
| - | ^staff | EAD: | ||
| - | ^status | EAD: | ||
| - | ^subject | EAD: | ||
| - | ^subjectGeneral | EAD: | ||
| - | ^submitStatus | EAD: | ||
| - | ^to | EAD: | ||
| - | ^toYear | EAD: | ||
| - | ^uniformTitle | EAD: | ||
| - | ^unitTitle | EAD: | ||
| - | ^unitTitleAdditional | EAD: | ||
| - | ^unitTitleOriginal | EAD: | ||
| - | ^unitTitleVarying | EAD: | ||
| - | ^university | EAD: | ||
| - | ^usage | EAD: | ||
| - | ^usagePermission | EAD: | ||
| - | ^usagePermissionExpiringDate | EAD: | ||
| - | ^year | EAD: | ||
| - | |||
| - | ===== config/ | ||
| - | ==== Exemple ==== | ||
| - | |||
| - | Paramètres de configuration de la fonction de normalisation des noms des fichiers sélectionnés. | ||
| - | |||
| - | < | ||
| - | prefix=monPrefix | ||
| - | suffix=monSuffix | ||
| - | maxLength=40 | ||
| - | fileNameRegex=[a-zA-Z0-9.\\-\\/ | ||
| - | </ | ||
| - | |||
| - | ==== Explications ==== | ||
| - | |||
| - | ^ Variable ^ Valeur (Exemple) ^ Explication ^ Si vide ou non-identifié ^ | ||
| - | ^ prefix | monPrefix |La valeur est ajoutée au début du nom de fichier au moment de la normalisation. | Si pas de valeur pour cette variable, aucun préfix n'est ajouté. | | ||
| - | ^ suffix | monSuffix |La valeur est ajoutée à la fin du nom de fichier au moment de la normalisation. | Si pas de valeur pour cette variable, aucun suffix n'est ajouté. | | ||
| - | ^ maxLength | 40 |La longueur de la chaine du nom de fichier est coupée au nombre de caractères correspondant. Y compris préfixe et suffixe configurés. | ||
| - | ^ fileNameRegex | < | ||
| - | |||
| - | ===== config/ | ||
| - | |||
| - | Structuré comme un fichier de propriétés JAVA, il met en relation sous la forme de '' | ||
| - | |||
| - | ==== Exemple ==== | ||
| - | |||
| - | Le caractère source (ex. '' | ||
| - | |||
| - | ==== Extrait du fichier .properties ==== | ||
| - | |||
| - | < | ||
| - | ü=ue | ||
| - | ä=ae | ||
| - | ö=oe | ||
| - | Æ=AE | ||
| - | ç=c | ||
| - | \u0152=OE | ||
| - | # whitespace as Unicode: \u0020 | ||
| - | \u0020=_ | ||
| - | # ( as Unicode, must be escaped due to java.util.regex.Pattern (https:// | ||
| - | \\u0028=_ | ||
| - | # ) as Unicode, must be escaped due to java.util.regex.Pattern | ||
| - | \\u0029=_ | ||
| - | # ' as Unicode | ||
| - | \u0027=_ | ||
| - | </ | ||
en/docuteam/packer_500_config.1541061167.txt.gz · Zuletzt geändert: 2019/01/07 11:26 (Externe Bearbeitung)